|
Roller Bearings, Ball Bearings, Sleeve Bearings, Needle Bearings, Taper Bearings, and Rod End Bearings. Search millions of parts. | Part Search Advanced NSN Search |
SLEEVE BEARINGS Parts 1377-00-863-7259 through 1420-00-139-8649 |
|||||
|
|||||
| 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 >>> | ||||
| Part number | Description | Category | Details | |
|---|---|---|---|---|
1377-00-863-7259 | SLEEVE RETAINING | |||
| 1377-00-884-4129 | SLEEVE END | |||
1377-00-888-8270 | SLEEVE, END, THRUSTER | III PACKAGE NOMINAL OVERALL LENGTH AND TYPE | 3.50 INCHES SHIPPING CONTAINER | |
| 1377-00-968-1076 | SLEEVE, FIRING PIN | |||
| 1385-00-809-2662 | STOP, SLEEVE | |||
| 1385-00-809-2664 | STOP, SLEEVE | |||
| 1377-00-976-0431 | SLEEVE, THRUSTER | |||
| 1377-00-996-8155 | SLEEVE, INSULATION | |||
| 1377-01-120-1867 | SLEEVE AND GRAIN AS | GENERAL CHARACTERISTICS ITEM DESCRIPTION | CONSISTS OF SHAPED PROPELLANT GRAIN,SLEEVE,AND LINER; USED IN PROPULSION OF ACFT EJECTION SEAT | |
| 1386-01-424-4188 | SLEEVE, VALVE | SPECIAL FEATURES | EXPLOSIVE ORDNANCE DISPOSAL TOOLS/EQUIP | |
| 1390-01-054-5142 | SLEEVE, FUZE | GENERAL CHARACTERISTICS ITEM DESCRIPTION | MATERIAL CARBON STEEL;CADIUM FINISHED.DIMENSIONS:LENGTH 2.832;OD 2.400;INTERNALLY THREADED 1.437-18UNEF-2B,LHAND EXTERNALLY THREADED 2.000-12UNS-1AITEM USED ON FUZE PROXIMITY,MODEL NO. M732 | |
| 1390-01-123-5039 | SLEEVE, SETTING | GENERAL CHARACTERISTICS ITEM DESCRIPTION | BRASS,ROD,HALF HARD,ASTM B16; 0.710 IN. O/A LONG; 0.435 IN. OUTSIDE DIA; DRILL POINT CAVITY 0.03 IN. MAX DEPTH BY 0.06 IN. MAX DIA PERMITTED; USED FOR FUZE M48A3 M557 | |
| 1398-00-974-6463 | SLEEVE, FASTENER, SAN | |||
| 1420-00-015-2069 | SLEEVE, COMPRESS | III END ITEM IDENTIFICATION | LGM-30 MINUTEMAN | |
| 1420-00-022-9377 | SLEEVE ASSEMBLY, OUT | III END ITEM IDENTIFICATION | MISSILE,LGM-30 | |
| 1420-00-064-7716 | SLEEVE AND PISTON COMPENSATOR VALVE-MATCHED SET | GENERAL CHARACTERISTICS ITEM DESCRIPTION | CONSISTS OF COMPENSATOR VALVE PISTON 1; COMPENSATOR VALVE SLEEVE 1 | |
| 1420-00-073-9308 | SLEEVE AND SPOOL MATCHED SET | GENERAL CHARACTERISTICS ITEM DESCRIPTION | ASSEMBLY OF 1 COMPENSATOR VALVE SPOOL P/N 44-1031,1 COMPENSATOR VALVE SLEEVE P/N 44-1046 | |
| 1420-00-073-9309 | SLEEVE, RETURN PORT | |||
| 1420-00-073-9344 | SLEEVE, DISCHARGE | |||
| 1420-00-077-1612 | SLEEVE, ALIGNMENT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | MATL BRASS BAR,QQ-B-626,COMP 22 1/2 HARD; DIA.MIN 0.2372,DIA.MAX. 0.2378; LENGTH 0.340 IN. MIN,0.350 | |
| 1420-00-324-5282 | SLEEVE | |||
| 1420-00-122-2603 | SLEEVE, SHIELD, RUBBER | SPECIAL FEATURES | DESIGN ANALYSIS | |
| 1420-00-337-2738 | SLEEVE, COMPRESSION, | |||
| 1420-00-122-2606 | SLEEVE, SHIELD, RUBBER | SPECIAL FEATURES | DESIGN ANALYSIS | |
| 1420-00-139-8649 | SLEEVE ASSEMBLY, LOC | III END ITEM IDENTIFICATION | AGM-69 SRAM MISSILE | |
