|
Roller Bearings, Ball Bearings, Sleeve Bearings, Needle Bearings, Taper Bearings, and Rod End Bearings. Search millions of parts. | Part Search Advanced NSN Search |
SLEEVE BEARINGS Parts 2810-00-568-0736 through 2810-00-839-9750 |
|||||
|
|||||
| <<< 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 >>> | ||||
| Part number | Description | Category | Details | |
|---|---|---|---|---|
2810-00-568-0736 | SLEEVE, EXHAUST PIPE | |||
| 2810-00-600-3523 | SLEEVE, PIPE E, TENSI | |||
2810-00-478-9617 | SLEEVE-PROP SHAFT OIL | III END ITEM IDENTIFICATION | ACFT ENG R1300 | |
| 2810-00-610-5145 | SLEEVE, PINION DRIVE | GENERAL CHARACTERISTICS ITEM DESCRIPTION | CONSISTS OF PART NUMBERS 144722 AND 160637; CHROMIUM PLATED PER AMS 2406,0.0001 IN. MIN AND 0.0003 IN. MAX THICK; SILVER PLATED PER AMS 2410 OR 2412,0.0001 IN. MIN AND 0.0003 IN. MAX THICK | |
| 2810-00-478-9737 | SLEEVE, OIL SEAL | GENERAL CHARACTERISTICS ITEM DESCRIPTION | MATL STEEL PER AMS 6470; HARDNESS PER BRINELL 290 MIN AND 321 MAX; 2.477 IN. MIN AND 2.479 IN. MAX LONG; 2.156 IN. MIN AND 2.160 IN. MAX OD; 5 GROOVES TO 1.92 IN. DIA; BORE 1.781 IN. MIN AND 1.782 IN. MAX DIA | |
| 2810-00-478-9774 | SLEEVE, CRANKSHAFT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | MATL ALUMINUM ALLOY PER AMS 4015 OR AMS 4322; 5.38 IN. LONG; 2.9972 IN. MIN AND 2.9978 IN. MAX OD; 2.80 IN. MIN AND 2.84 IN. MAX ID; 4 HOLES 1.0 IN. DIA BY 0.5 IN. DEEP | |
| 2810-00-478-9790 | SLEEVE-STATIONARY R | III END ITEM IDENTIFICATION | ACFT ENG R1300 | |
| 2810-00-614-8713 | SLEEVE, HOUSING | GENERAL CHARACTERISTICS ITEM DESCRIPTION | MATL STEEL PER AMS 5615; HARDNESS PER ROCKWELL C38 MIN AND C43 MAX; 1.6 IN. LONG; BODY 2.4125 IN. MIN AND 2.4135 IN. MAX OD; FLANGE 3.28 IN. OD; BORE 2.179 IN. MIN AND 2.183 IN. MAX DIA CHAMFERED FLANGE END TO 2.37 IN. DIA AT 30 DEG; 8 HOLES 0.219 IN. DIA; 4 HOLES THREADED NUMBER 10-32 TAP | |
| 2810-00-614-8714 | SLEEVE | |||
| 2810-00-652-5820 | SLEEVE | |||
| 2810-00-659-8741 | SLEEVE, SUPERCHARGER | |||
| 2810-00-498-6900 | SLEEVE, IMPELLER SHA | |||
| 2810-00-498-6902 | SLEEVE, IMPELLER SHA | |||
| 2810-00-505-9075 | SLEEVE, EXHAUST PIPE | |||
| 2810-00-505-9118 | SLEEVE, OIL RELIEF V | |||
| 2810-00-703-1677 | SLEEVE, PRIMER LINE | |||
| 2810-00-512-9733 | SLEEVE, SEAL | GENERAL CHARACTERISTICS ITEM DESCRIPTION | MATL STEEL PER AMS 6322 OR AMS 6323; 2.66 IN. LONG; 6.374 IN. MIN AND 6.378 IN. MAX OD; 1 GROOVE 6.225 IN. MIN AND 6.230 IN. MAX DIA; 1 GROOVE 6.185 IN. MIN AND 6.190 IN. MAX DIA; 1 GROOVE 6.145 IN. MIN AND 6.150 IN. MAX DIA; 24 HOLES 0.344 IN. DIA | |
| 2810-00-716-2943 | SLEEVE | |||
| 2810-00-523-3137 | SLEEVE, PROPELLER SH | |||
| 2810-00-932-6260 | SLEEVE, ALTERNATOR | |||
| 2810-00-974-8213 | SLEEVE | |||
| 2810-00-991-7422 | SLEEVE, SHAFT PROTEC | |||
| 2810-00-993-7071 | CYLINDER SLEEVE AND PISTON ASSEMBLY | |||
| 2810-01-010-6424 | SLEEVE | |||
| 2810-00-839-9750 | CYLINDER SLEEVE AND PISTON ASSEMBLY | SPECIAL FEATURES | INCLUDES VALVES,SPRINGS,ROCKER ARM, PISTON AND RING ASSY 434046,PISTON PIN AND ROCKER HUB BOLTS 65678; FOR CYL NUMBER 1 | |
